Thixotropic medium modulus two-component sealant

BETONSEAL PU 300

COD: BETONSEAL PU 300

Waterproof sealant, medium modulus for sealing joints vertically (or horizontally). It is recommended for its high abrasion resistance and strong adhesion to concrete with NORPHEN FONDO IGRO primer.

categories:
SEALANTS

description

is a 2 pack thixotropic sealant of medium modulus epoxy-polyurethane nature consisting of: • component A: mixture of epoxy and polyurethane prepolymers (isocyanate-free) with high molecular weight, additives and fillers; • component B: pigments and co-polymerization polyamine. Once the two components have been mixed, gives rise to a thixotropic creamy paste easily applied by means of a trowel or stucco spatula and is therefore suitable for use both vertically and horizontally. does not contain solvents or other volatile substances for which no shrinkage or distortion of the seals will occur. The sealings made with are: → elastic: elongation under normal operating conditions 10% maximum; → abrasion resistant; → puncture-resistant; → chemically resistant to the most common aggressive agents (oils, water, alkaline cleaning solutions etc.); → waterproof and vapor-tight.

use case

  • BETONSEAL PU 300 It is used - both indoors and outdoors - as a sealant for:
  • • joints of vertical concrete construction elements;
  • • floor joints on industrial floors and/or floors subject to heavy traffic;
  • • joints of p-PVC or rubber floors;
  • • connection of bases of industrial machinery;
  • • joints on floors with ceramic coatings subject to trolley or pedestrian traffic (supermarkets, shopping malls, sidewalks, etc.)

technical features

  • Impermeabilizzante
  • Elastico
  • Resistente raggi UV
  • Resistente al gelo
  • Lenta maturazione
  • Pedonabile
  • Carrabile

field of use

  • Per interni / esterni
  • Pareti interne / esterne
  • Pavimenti interni / esterni

applications

  • Bicomponente
  • Applicazione spatola

certifications

Application type Minimum consumption Maximum consumption U.M. Notes
L x S = 10 mm x 10 mm 0,155 0,155 kg/m The table above shows consumption for different joint sizes, where L = joint width (in mm) and S = seal thickness (in mm). Consumption is expressed in kg per meter of sealed joint.
L x S = 5 mm x 5 mm 0,040 0,040 kg/m formula for calculating consumption, in kg/m of joint length, is:
L x S = 12 mm x 10 mm 0,186 0,186 kg/m UMPTION = 0.00155 x Joint width, L (in mm) x Seal thickness, S (in mm).
L x S = 15 mm x 10 mm 0,233 0,233 kg/m ill a volume of 1 L of joint takes 1.55 kg.
L x S = 18 mm x 10 mm 0,279 0,279 kg/m
L x S = 20 mm x 10 mm 0,310 0,310 kg/m
L x S = 25 mm x 12,5 mm 0,484 0,484 kg/m
L x S = 50 mm x 25 mm 1,9385 1,938 kg/m
L x S = 70 mm x 35 mm 3,798 3,798 kg/m
L x S = 100 mm x 50 mm 7,750 7,750 kg/m
Variant Packaging ADR Pallet packaging Components
GRIGIO CEMENTO (cement grey) kit (A+B) - 6.4 kg P* - A = 6,00 kg (plastic bucket)

Download data sheets

Data sheet
Technical Data sheet (PDF)
Security sheet
BETONSEAL PU 300 (A)
Security sheet
BETONSEAL PU 300 (B)

Looking for more information?