WATER-BASED EPOXY IMPREGNATING AGENT

SW SOLID

COD: SW SOLID

Anti-dust, anti-oil and two-component consolidating agent in aqueous emulsion ideal for the treatment of quartz hardened concrete floors. SW SOLID is also recommended for indoor floor treatments because it does not contain solvents and does not develop od

categories:

SW SOLID is used for the realization of:
• Transparent anti-dust and anti-oil treatments with a glossy effect, on quartz-hardened concrete floors (with or without iron-oxide colouring) matured for at least ten days.
• Consolidating treatments for plasters or mortars without cohesion.
• Primer for the treatment of concrete floors before coating with film resins.
• Consolidating finishing treatment for polymer-cement trowel coatings, microcements and skim coats.
• Additive for mortars, skim coats and concretes to increase adhesion performance, mechanical strength, flexibility in interiors and exteriors.

Application type	Minimum consumption	Maximum consumption	U.M.	Notes
As a dust-proofing agent, in 2 coats. 1 kg (A+B) + 3÷4 kg water.	100	100	g/m²	The consumption shown in the table is for the undiluted product.
As anti-oil, in 3 coats. 1 kg (A+B) + 4÷6 kg water.	150	150	g/m²
As a consolidating agent for floors with polished plaster effect. 1 kg (A+B) + 4÷5 kg water.	40	60	g/m²
As an additive for cementitious mixes, per 1 L of mixing water.	30	100	g/L
As a gripping base coat for damp surfaces.	150	200	g/m²