CHEAP EPOXY ENAMEL
SW SMALTO LC
COD: SW SMALTO LC
Semi-glossy, water-based epoxy coating for substrates with up to 5% moisture content (carbide measurement). Good mechanical and aesthetic performance. Almost no yellowing. Colors available with tintometric system. For low opacity tints use NORPHEN SW FONDO first.
categories:
description
is a colored bi-component epoxy enamel, water-based, composed of: • component A: mixture of liquid epoxy prepolymers and additives; • component B: copolymerization amine, pigments, additives and water. Once cured, gives rise to a film impermeable to water and oils with a higher vapor permeability than traditional solvent-free epoxy resins. In addition, shows excellent adhesion to the substrate and good general chemical resistance. is available in a wide range of colours on request. In COLORABLE version, is designed for universal tinting systems.
use case
- SW SMALTO LC It is used in the coating of industrial concrete surfaces on walls and floors.
- ► Floor-standing
- - Creation of colorful stain and dust-resistant coatings for quartz-finished industrial concrete surfaces, particularly suitable for dust and waterproofing protection of floors in meeting rooms, entrance and reception areas of public buildings, stores, warehouses and dry goods storage areas with handling by soft-wheel trolleys.
- ► Wall-mounted
- • Creation of wall coverings in the fresh produce processing industry, bakeries, ham factories where high pressure water cleaning does not occur.
- • Creation of waterproof and easily sanitized walls in public bathrooms and showers (also in the industrial sector).
technical features
-
![]()
Impermeabilizzante
-
![]()
Resistente alle macchie
-
![]()
Lenta maturazione
-
![]()
Carrabile
field of use
-
![]()
Per interni
-
![]()
Pavimenti interni
-
![]()
Capannoni
applications
-
![]()
Bicomponente
-
![]()
Applicazione rullo
certifications
| Application type | Minimum consumption | Maximum consumption | U.M. | Notes |
| To make a coating thickness (0.15 - 0.20) mm | 0,30 | 0,35 | kg/m² | add 10-15% water on A+B |
| Variant | Packaging | ADR | Pallet packaging | Components |
| RAL 7040 | kit (A+B) - 6.7 kg | P* | - | A = 1 kg (plastic jar) |
| RAL 7040 | (A+B) - 20.1 kg | SI' | - | A = 3 kg (jerry can) |
| COLORABLE | kit (4A+4B) - 3.40 kg | P* | - | A = 0,15 kg (busta) |
| COLORABLE | kit (A+B) - 5.67 kg | P* | - | A = 1 kg (plastic jar) |
| COLORABLE | (A+B) - 17.02 kg | SI' | - | A = 3 kg (jerry can) |
| TIER 1 COLOUR | kit (A+B) - 6.7 kg | P* | - | A = 1 kg (plastic jar) |
| TIER 1 COLOUR | (A+B) - 20.1 kg | SI' | - | A = 3 kg (jerry can) |
| TIER 2 COLOUR | kit (A+B) - 6.7 kg | P* | - | A = 1 kg (plastic jar) |
| TIER 2 COLOUR | (A+B) - 20.1 kg | SI' | - | A = 3 kg (jerry can) |
| TIER 3 COLOUR | kit (A+B) - 6.7 kg | P* | - | A = 1 kg (plastic jar) |
| TIER 3 COLOUR | (A+B) - 20.1 kg | SI' | - | A = 3 kg (jerry can) |
| TIER 4 COLOUR | kit (A+B) - 6.7 kg | P* | - | A = 1 kg (plastic jar) |
| TIER 4 COLOUR | (A+B) - 20.1 kg | SI' | - | A = 3 kg (jerry can) |
