SC 1-F

use case

• ► Creation of medium-fast drying screeds with high compressive strength (from 30 to 40 MPa depending on compaction) in adhesion to the slab or floating on sliding sheet.
• SC 1-F is the ideal product for the realization of:
• • Screeds for balconies, terraces and flat roofs.
• • Radiant floor screeds (thermal conductivity λ = 1.9 ± 0.2 W/(m-K)).
• • Low thickness (minimum 2 cm) composite screeds (in adherence to the slab).
• • Floating screeds (on sliding sheet) with a thin thickness (2.5 cm).
• • Composite screeds (if well compacted) for garages to be covered with resins or tiles.
• • Composite or floating screeds for the installation of solid wood.
• ► Heating floors
• The almost total absence of air in the hardened mix (due to its special grain size curve and if well compacted) gives the SC 1-F screed the special characteristic of insignificant shrinkage and expansion movements, combined with its high heat transfer capacity (thermal conductivity λ = 1.9 ± 0.2 W/(m-K)).
• SC 1-F is not chemically aggressive against common types of piping used in heating systems (PEX, multilayer pipes PEX/Al/PEX etc.).
• The normal thickness of screed SC 1-F is (5-6) cm, however, this product is suitable for various thicknesses, up to a minimum of 2.5 cm for floating laying on slip sheet and 2 cm overlay in radiant floors with subsequent laying of marble or large-format porcelain tile.
• In the case of solid parquet laid with glue, the minimum thickness recommended on radiant floors is 4 cm.
• As per the state of the art after the screed has been made and the 14 days from practice (or more, if possible) to reach more than 90% of the mechanical performance of the binder has elapsed, the heating should be turned on (slowly) and then allowed to cool down, before proceeding with the laying of the coatings.

field of use

• Per interni / esterni
• Pavimenti interni / esterni
• Marciapiedi
• Tetti, terrazzi e balconi
• Piscine
• Cantine e garage

certifications