Waterproofing for manual application

NORTIG 15

COD: NORTIG 15

Single-component elastomeric waterproofing liquid sheath, specifically for the treatment of floors and walls (plaster, plasterboard, traditional plaster, recomposed wood panels etc.). NORTIG 15 can be used in bathrooms, shower rooms and wet areas in general, before the installation of tiles. Applicable by roller, trowel and brush.

categories:

• NORTIG 15 is used outdoors as a liquid-applied waterproofing membrane for balconies, terraces, and flat roofs (with or without NYCON 100 or NYCON F reinforcement) in climatic zones where high cold flexibility is required, and as a sheathing for coating waterproofed roofs with old sheathing in need of renovation.
- NORTIG 15 is recommended as a waterproofing membrane to be made in situ on horizontal and vertical surfaces indoors prior to the installation of ceramic coatings. Its use is particularly suitable in wet environments (bathrooms and showers, kitchens and laundry rooms).
• NORTIG 15 is used for encapsulating asbestos-cement both indoors and outdoors.
The laying media on which NORTIG 15 can be applied are:
→ Outdoors:
• sand and cement screeds;
• concrete finished without quartz dusting;
• plasters, sand and cement;
• tile cladding;
• old membranes;
• gutters and converse, cornices and chimneys.
• Asbestos-cement panels/surfaces.
→ Indoors:
• anhydrite screeds;
• cementitious plasters;
- Lime-based plasters (after treatment with PRIMER PLS);
•plasterboard;
• Tile cladding.
• Asbestos-cement panels/surfaces.

Application type	Minimum consumption	Maximum consumption	U.M.	Notes
As a waterproofing agent for flat roofs, with NYCON 100 or NYCON F reinforcement	2,2	2,3	kg/m²	In 2 hands.
As an undertile waterproofing	1,0	1,2	kg/m²	Before the installation of ceramic, mosaic and natural stone coverings.
As a medium-lasting protective on bituminous mantles	0,5	0,6	kg/m²	Application of two coats of the same thickness in different colors. Total dry film thickness: approximately 300 µm.
As a Type A encapsulant	0,6	0,7	kg/m²	Application of two coats of the same thickness in different colors. Total dry film thickness: approximately 250 µm.
As a Type B encapsulant	0,5	0,6	kg/m²	Single-coat application (1 color). Total dry film thickness approximately 200 µm.
As a Type C encapsulant	0,4	0,5	kg/m²	Choose a color that contrasts with the surface to be coated (on gray slabs, choose ROSSO COPPO). [xxxx] diluted with 30% water.
As a Type D encapsulant	0,22	0,25	kg/m²