SOLVENT-FREE EPOXY ENAMEL WITH HIGH CHEMICAL RESISTANCE
NORPHEN 200 HCR
COD: NORPHEN 200 HCR
Two-component epoxy coating for flooring with high chemical and mechanical resistance. Reinforceable with quartz sand. Applicable by roller, spatula.
categories:
Description
NORPHEN 200 HCR is a two-component epoxy formulation, used for the realization of concrete floor coverings. The product consists of: • component A: mixture of liquid epoxy prepolymers, additives and pigments; • component B: copolymerization amine. Coatings made with NORPHEN 200 HCR have remarkable hardness, abrasion resistance and good overall chemical resistance, while maintaining good flexibility. In addition to this, NORPHEN 200 HCR gives rise to a coating with a pleasing surface appearance (smooth or non-slip depending on the mode of application), waterproof, glossy, endowed with excellent general chemical resistance, remarkable hardness and abrasion resistance, easy to clean, suitable especially in environments where special hygienic requirements and ease of maintenance are prescribed. The product is also available in the "WINE RESISTANT" version specific for applications on cellar and winery flooring (see specific Technical Sheet).
Field of application
- NORPHEN 200 HCR is used as:
- • Highly chemically resistant dustproof, coloured, waterproof and wheelable coating with thicknesses from 150 to 300 microns, for industrial concrete flooring.
- • Finishing coating of self-levelling epoxy systems.
- • Finishing coating of multilayer systems structured with MALTA RAPIDA and STRATOFLEX.
TECHNICAL FEATURES
-
![]()
Impermeabilizzante
-
![]()
Resistente al gelo
-
![]()
Resistente alle macchie
-
![]()
Lenta maturazione
-
![]()
Pedonabile
-
![]()
Carrabile
field of use
-
![]()
Per interni
-
![]()
Pavimenti interni
-
![]()
Cantine e garage
-
![]()
Capannoni
applications
-
![]()
Bicomponente
-
![]()
Applicazione rullo
-
![]()
Applicazione frattazzo
-
![]()
Applicazione pennello
CE Marking
| Application type | Minimum consumption | Maximum consumption | U.M. | Notes |
| The consumption of NORPHEN 200 HCR is listed by type of installation support; The preparation of the latter is shown in the technical sheet. | ||||
| As a roller finishing coating of a prepared surface in self-leveling | 0,08 | 0,12 | kg/m² | |
| As a rubber spatula finishing coating of a surface prepared with waste dusting with QUARTZ 0.30.9 mm | 0,40 | 0,42 | kg/m² |
| Variant | Packaging | ADR | Pallet packaging | Components |
| RAL 7040 | kit (A+B) - 2.9 kg | P* | - | A = 1.9 kg (steel bucket) |
| RAL 7040 | (A+B) - 8.7 kg | SI' | - | A = 5.7 kg (steel bucket) |
| TIER 1 COLOUR | kit (A+B) - 2.9 kg | P* | - | A = 1.9 kg (steel bucket) |
| TIER 1 COLOUR | (A+B) - 8.7 kg | SI' | - | A = 5.7 kg (steel bucket) |
| TIER 2 COLOUR | kit (A+B) - 2.9 kg | P* | - | A = 1.9 kg (steel bucket) |
| TIER 2 COLOUR | (A+B) - 8.7 kg | SI' | - | A = 5.7 kg (steel bucket) |
| TIER 3 COLOUR | kit (A+B) - 2.9 kg | P* | - | A = 1.9 kg (steel bucket) |
| TIER 3 COLOUR | (A+B) - 8.7 kg | SI' | - | A = 5.7 kg (steel bucket) |
| TIER 4 COLOUR | kit (A+B) - 2.9 kg | P* | - | A = 1.9 kg (steel bucket) |
| TIER 4 COLOUR | (A+B) - 8.7 kg | SI' | - | A = 5.7 kg (steel bucket) |
