HYDROCARBON RESISTANT EPOXY ENAMEL

NORPHEN 200 FUEL

COD: NORPHEN 200 FUEL

Two-part waterproofing epoxy coating, for floor, walls and tanks, fuel resistant.

categories:

NORPHEN 200 FUEL is used as a coating – with a thickness between 200 and 500 microns – of:
• floors and walls of boiler rooms;
• tanks and containment basins for diesel oils, fuel oils (BTZ, MTZ, etc.), lubricating oils, vegetable oils for non-food uses;
• tanks for the momentary containment of aromatic hydrocarbons;
• flooring of mechanical workshops;
• areas where urea solutions (e.g. AD Blue) for automotive use are handled;
• floors subjected to the action of cutting oils.
• floors subject to spills or prolonged contact with ethylene and propylene glycol solutions.
NOTE: For internal linings of petrol tanks, ask for the product EPOXY LINER (see Data Sheet).

Application type	Minimum consumption	Maximum consumption	U.M.	Notes
Applied by roller or brush in 2 coats on dry substrates after washing, sanding or diamond grinding	0,30	0,35	kg/m²
Applied in 2 coats with a roller or block brush on steel surfaces (ground or sandblasted and primed)	0,3	0,35	kg/m²
Applied with a roller or block brush in 1 coat as a protective finish for MALTA RAPIDA or STRATOFLEX coatings laid with the self-levelling method	0,15	0,18	kg/m²
Applied with a "mod. L400" trowel as a finish of MALTA RAPIDA or STRATOFLEX coatings sprinkled with 0,3-0,9 mm QUARTZ sand	0,70	0,70	kg/m²
Applied with a "mod. L400" trowel as a finish of MALTA RAPIDA or STRATOFLEX coatings sprinkled with 0,7-1,2 mm QUARTZ sand	0,90	0,90	kg/m²