Single-phase dehumidifying pre-mixed plaster for wet and saline walls
DRY BETON SUPER
COD: DRY BETON SUPER
Dehumidifying plaster specific for laying on very damp walls, even in the moderate presence of salts, to be applied without the use of primer. To a single component to be used both as rinzaffo and as plaster.
categories:
description
is a dry premixed plaster based on hydraulic binders resistant to sulphates, selected aggregates, light mineral fillers, synthetic fibers and specific additives. Mixed with only clean water, it forms an easily workable, thixotropic and highly lightened, ready-to-use mix for making very high-performance rehabilitation plasters without the need to pre-treat the surface with other products. Hardened mortar possesses macroporous structure that is particularly effective both against salts present (of which it causes crystallization within its own mass) and against capillary rising damp (of which it causes outward diffusion).
use case
- DRY BETON SUPER is used as plaster for:
- • The renovation of damp masonry that presents problems of rising by capillarity both outdoors and indoors.
- • The dehumidification of masonry in environments with high concentrations of salt (lagoon and marine areas), also deteriorated by saline exfoliation.
- • The renovation of masonry or concrete basements, provided that there is no infiltration of water from the outside.
technical features
-
![]()
Traspirante
-
![]()
Resistente raggi UV
-
![]()
Reazione al fuoco A1
-
![]()
Resistente al gelo
-
![]()
Applicabile con basse temperature
-
![]()
Veloce maturazione
field of use
-
![]()
Per interni / esterni
applications
-
![]()
Monocomponente
-
![]()
Pronto all'uso
-
![]()
Applicazione frattazzo
certifications
| Application type | Minimum consumption | Maximum consumption | U.M. | Notes |
| To make a layer of 2 cm | 20 | 22 | kg/m² |
| Variant | Packaging | ADR | Pallet packaging | Components |
| - | bag - 25 kg | NO | 48 bags |
