SOLVENT-BASED POLYURETHANE ADHESION PROMOTER

CONSOLID PRIMER

COD: CONSOLID PRIMER

Primer, hardener, and adhesion promoter for TRAFFIDECK FLEX 2000 SG and TRAFFIDECK FLEX 3000 HA

categories:

CONSOLID PRIMER is used as:
• A penetrating sealer and consolidant for any type of substrate (that is not sensitive to solvents) prone to chalking.
• Adhesion promoter for applying fresh TRAFFIDECK FLEX 2000 SG to cured TRAFFIDECK FLEX 2000 SG (creating a construction joint).
• Adhesion promoter for applying TIPEWALL to cured TRAFFIDECK FLEX 2000 SG (more than 7 days after application).
• Adhesion promoter for the application of TRAFFIDECK EAP (epoxy primer for hot-mix asphalt, see Technical Data Sheet), TRAFFIDECK FLEX 2000 SG, and TRAFFIDECK FLEX 3000 HA.
By its very nature, CONSOLID PRIMER is prone to yellowing: this aesthetic characteristic must be carefully evaluated if the product is used as a primer for transparent resins and as a visible consolidant.
This product can be used indoors and outdoors.

TYPE OF APPLICATION	MINIMUM CONSUMPTION	MAXIMUN CONSUMPTION	U.O.M.	NOTE
On concrete surfaces.	120	130	g/m²	Consumption depends on the substrate porosity.
As a consolidating agent for natural stone.	100	3000	g/m²	stuni stone, consumption reaches up to 3000 g/m² with a penetration of over 2 cm below the surface.
On the TRAFFIDICK FLEX 2000 SG (old model) as an adhesion promoter.	80	100	g/m²	product turns yellow when exposed to light, so it cannot be used as a consolidating agent for aesthetic purposes.
TRAFFIDICK FLEX 3000 HA uses TRAFFIDECK EAP as its adhesion promoter.	90	110	g/m²