INDUSTRY

SOLUZIONI PER GLI SPAZI DI LAVORO

Nord Resine proposes a series of functional and visually appealing coatings for the industrial sector stemming from over 30 years of technological advancements and experience on the market.
Our coatings create surfaces that fully conform to the safety regulations applicable to the target sectors, while their aesthetic qualities satisfy the most demanding expectations.
To facilitate the work of professional applicators, Nord Resine offers a full range of solutions with a vast number of formulations, all designed to maximise performance at a competitive price.

A multi-layer epoxy coating made with an R9 non-slip top coat (DIN 51130) for areas prone to oil stains during vehicle repairs.
The coating is around 2.5 mm thick for long-term resistance to the repair work conducted in the workshop. Resistant to frequent washing and to the chemical products used in the sector.

RESINS FOR INDUSTRIAL FLOORS

NORPHEN 200SOLVENT-FREE EPOXY ENAMEL

Consumption approximately 0.10 kg/m2.

NORPHEN 300EPOXY ENAMEL

Consumption approximately 0.55 kg/m2.

RESINS FOR INDUSTRIAL FLOORS

MALTA RAPIDA 12+ SPRINKLING WITH NATURAL QUARTZ 0.4/0.6 mm

Consumption of MALTA RAPIDA 2 kg/m2. Consumption of natural quartz 0.4/0.6 mm sprinkle 3.0/3.5 kg/m2.

PRIMERs

FONDO SLBI-COMPONENT SOLVENT-FREE ADHESION PRIMER

or FONDO WET&DRY
Add NATURAL QUARTZ 0.1/0.3 + 0.4/0.6 mm + SPRINKLE UNTIL SATURATED WITH NATURAL QUARTZ 0.4/0.6 mm.
Consumption of quartz in mixture 30–50% max
Consumption of FONDO SL approximately 0.6 kg/m2.
Consumption of natural quartz sprinkle 3 kg/m2.