INDUSTRY

SOLUZIONI PER GLI SPAZI DI LAVORO

Nord Resine proposes a series of functional and visually appealing coatings for the industrial sector stemming from over 30 years of technological advancements and experience on the market.
Our coatings create surfaces that fully conform to the safety regulations applicable to the target sectors, while their aesthetic qualities satisfy the most demanding expectations.
To facilitate the work of professional applicators, Nord Resine offers a full range of solutions with a vast number of formulations, all designed to maximise performance at a competitive price.

COATINGS FOR FLOORS WITH ULTRA-FAST CURING, ODOURLESS, ANTI-WEAR, SANITISABLE AND NON-SLIP.

EPOGREEN is a low-thickness (about 2.5 mm) flooring consisting of special resins and ceramic quartz granules. The result is a flooring that is aesthetically pleasing and elegant, highly resistant to wear, non-slip (R10), flexible even at very low temperatures (–30°C), washable with a high-pressure water jet and sanitisable with special products. The advantages of the system include the completion of the floor within the space of 1 day and the total absence of odour emissions. After only 3 hours from the end of laying, the floor surface can be used normally.

RESINS FOR INDUSTRIAL FLOORS

EPOGREEN COATEXTREMELY FAST-CURING BI-COMPONENT WATERPROOF AND ANTI-DIRT TOP COAT

Consumption 0.4/0.5 kg/m2

RESINS FOR INDUSTRIAL FLOORS

EPOGREEN BONDEXTREMELY FAST-CURING THREE-COMPONENT FLEXIBLE BASE COAT

Add NATURAL QUARTZ 0.1/0.3 mm at 20% by weight Add QUARTZ 0.3/0.9 mm at 100% by weight + SPRINKLE 0.3/0.9 mm CERAMIC QUARTZ UNTIL SATURATION

Consumption of EPOGREEN 1.3 kg/m2
Consumption of sprinkle 4 kg/m2

PRIMERs

STONE LCEPOXY BASE COAT FOR DAMP SURFACES

Add NATURAL QUARTZ 0.1/0.6 mm Consumption 0.5 kg/m2 + SPRINKLE WITH 0.3/0.9 mm CERAMIC QUARTZ Consumption 3 kg/m2

EPOGREEN PRIMERPRIMER FOR NON-ABSORBENT BASE COATS

Consumption 0.08 kg/m2

An R9 (DIN 51130) non-slip coating cycle that withstands chemical aggression and is suitable for frequent and repeated washing. The final thickness is 2.5 mm, obtained with a quartz-dusted base coat, an intermediate skim coat with dusting and two coats of top coat, the second of which is used merely to uniform the colour.

RESINS FOR INDUSTRIAL FLOORS

NORPHEN 200 HCRSOLVENT-FREE EPOXY ENAMEL WITH HIGH CHEMICAL RESISTANCE

Consumption approximately 80/100 g/m2.

RESINS FOR INDUSTRIAL FLOORS

NORPHEN 300

Consumption approximately 0.55 kg/m2.

RESINS FOR INDUSTRIAL FLOORS

MALTA RAPIDA 12+ SPRINKLING WITH NATURAL QUARTZ 0.4/0.6 mm

Consumption of MALTA RAPIDA 2 kg/m2. Consumption of natural quartz 0.4/0.6 mm sprinkle 3 kg/m2.

PRIMER

FONDO SLBI-COMPONENT SOLVENT-FREE ADHESION PRIMER or FONDO WET&DRY

or FONDO WET&DRY
Add NATURAL QUARTZ 0.1/0.3 + 0.4/0.6 mm
+ SPRINKLE WITH NATURAL QUARTZ 0.4/0.6 mm

Consumption of quartz in mixture 30–50% max
Consumption of FONDO SL approximately 0.7 kg/m2.
Consumption of natural quartz sprinkle 3 kg/m2.

A high-thickness R9-10-11-12 non-slip coating (DIN 51130) for mechanical resistance to heavy-duty processing applications typical of slaughterhouses and dairies, with a surface suited to environments that collect large amounts of fat on the floor and require high chemical resistance against high-pressure washes and aggressive detergents. The 5 mm-thickness is obtained with the MULTI-LAYER method: a stratified base with coloured resins and a layer of FARMACRETE top coat made up of a transparent binder and ceramic quartz sand.
The resulting coating retains its original appearance over time.

RESINS FOR INDUSTRIAL FLOORS

FARMACRETEANTI-SLIP COATING CONSISTING OF TRANSPARENT RESIN AND COLOURED QUARTZ

Consumption approximately 0.5/0.6 kg/m2.

FARMACRETEANTI-SLIP COATING CONSISTING OF TRANSPARENT RESIN AND COLOURED QUARTZ

Add NATURAL QUARTZ 0.1/0.3 mm at 20% by weight Add CERAMIC QUARTZ at 80% by weight + SPRINKLE 0.3/0.9 mm CERAMIC QUARTZ UNTIL SATURATION

Consumption of FARMACRETE resin approximately 1 kg/m2. Consumption of CERAMIC QUARTZ 0.3/0.9 mm sprinkle 3.5 kg/m2.

RESINS FOR INDUSTRIAL FLOORS

MALTA RAPIDA 13+ DUSTING WITH QUARTZ 0.7/1.2 mm

Consumption of MALTA RAPIDA 4 kg/m2. Consumption of NATURAL QUARTZ 0.7/1.2 mm sprinkle 4 kg/m2.

PRIMER

FONDO SLBI-COMPONENT SOLVENT-FREE ADHESION PRIMER or FONDO WET&DRY

or FONDO WET&DRY
Add NATURAL QUARTZ 0.1/0.3 + 0.4/0.6 mm
+ SPRINKLE WITH NATURAL QUARTZ 0.4/0.6 mm

Consumption of quartz in mixture 30–50% max
Consumption of FONDO SL approximately 0.7 kg/m2.
Consumption of natural quartz sprinkle 3 kg/m2.

INDUSTRY

Need more information? Contact us for further information and for the prices.

CONTACT US FOR A QUOTATION
DOWNLOAD THE BROCHURE
Search for a zone contact person
Contact our technical office
Download system leaflets

Search for a zone contact person




    I authorizeI do not authorize

    Contact request




      I authorizeI do not authorize