Low-thickness dehumidifying skim coat for treating rising damp
INTODRY
COD: INTODRY
Dehumidifying skim coat specific for laying on very damp walls, even in the moderate presence of salts, to be applied without the use of primer. To a single component to be used both as rinzaffo and as plaster.
categories:
description
is a dry premixed skim coat based on hydraulic binders resistant to sulphates, selected aggregates, light mineral fillers, synthetic fibers and specific additives. Mixed with only clean water, it forms an easily workable, thixotropic and highly lightened, ready-to-use mix for making very high-performance rehabilitation plasters without the need to pre-treat the surface with other products.
use case
- INTODRY is specifically designed as a low-thickness plaster for solving troubles caused by rising damp in internal and external walls. INTODRY can be applied on:
- • Cohesive, adhering to the substrate, non-brittle and appropriately prepared plasters.
- • Concrete.
- • Mixed masonry.
- • Brick or stone masonry.
- • Concrete blocks.
technical features
-
![]()
Traspirante
-
![]()
Resistente raggi UV
-
![]()
Reazione al fuoco A1
-
![]()
Resistente al gelo
-
![]()
Applicabile con basse temperature
-
![]()
Veloce maturazione
field of use
-
![]()
Per interni / esterni
applications
-
![]()
Monocomponente
-
![]()
Pronto all'uso
-
![]()
Applicazione frattazzo
certifications
| Application type | Minimum consumption | Maximum consumption | U.M. | Notes |
| To make a layer of 2 cm | 16 | 18 | kg/m² | Consumption referred to the product in powder form. |
| Variant | Packaging | ADR | Pallet packaging | Components |
| - | bag - 25 kg | NO | 48 bags |
