Water-based mono-component viscous liquid with granulated effect.
Extremely high adhesion (up to 15 N/mm² on porcelain stoneware) for “difficult” gripping treatments as in the case of skim coats, adhesives and mortars on glass, ceramic, stoneware, coated surfaces, plastic materials, etc.
| TYPE OF APPLICATION | MINIMUM CONSUMPTION | MAXIMUM CONSUMPTION | UoM | DILUTION |
|---|---|---|---|---|
| RICRETE 1C pure | 0,12 | 0,15 | kg/m2 | Do not dilute. |
| RICRETE 1C + 10% RICRETE 1C/PLUS* | 0,13 | 0,16 | kg/m2 | Do not dilute. |
| VARIANT | PACKAGING | ADR | UNITS PER PALLET | COMPONENTS |
|---|---|---|---|---|
| – | jug – 1 kg | NO | – | |
| – | Plastic bucket – 4 kg | NO | 120- bucket | |
| Additive PLUS | Tin – 1 kg | |||
| Additive PLUS | Metal bucket – 5 kg |
RICRETE 1C is a ready-to-use mono-component liquid adhesion promoter based on hybrid resins in aqueous dispersion with special natural fillers.
Applied by brush or roller on a smooth, glossy and non-absorbent surface RICRETE 1C it hardens rapidly forming a compact, rough and very adherent film on the substrate.
The presence of natural fillers in the formulation facilitates the adhesion of the products applied subsequently, especially in case of thick coatings.
For thin-layer applications, for which a coarse surface would produce an unpleasant effect, there is a specific version for this product without chippings: RICRETE 1C SQ (see Technical Sheet).
For applications outdoors or on dry surfaces that will be constantly exposed to damp conditions, a cross-linking agent – RICRETE 1C/PLUS – is available, which must be added directly to RICRETE 1C in the measure of 10% (refer to the Par. Preparation of the product ► For applications outdoors or on dry surfaces that will be constantly exposed to damp conditions).
RICRETE 1C is used as an adhesion primer before applying either self-leveling or skim coat mortars with cementitious adhesives on glossy and non-absorbent substrates such as:
• glazed ceramic coatings;
• stone coatings;
• Rigid PVC and other plastics (but PE e PTFE);
• linoleum;
• resin coatings (water or solvent based)
RICRETE 1C can also be used as an adhesion primer on concrete and on non-absorbent and moisture sensitive substrates, such as:
• wood;
• gypsum;
• anhydrite.
► Typical applications of RICRETE 1C are:
→ the preparation of tiled surfaces (with glazed ceramic, porcelain stoneware, stone) or resin for the over-application of smoothing compounds (with a trowel or self-leveling);
→ the preparation of tiled surfaces (with glazed ceramic, porcelain stoneware, stone) or resin for bonding tiles with cementitious adhesives;
→ the surface treatment of chipboard or wood panels for the subsequent application of moisture protection products.
► The product can also be used on heated screeds.
► RICRETE 1C is suitable for indoor use and only on dry surfaces.
For use outdoors or on surfaces that will be in continuous contact with moisture, a special cross-linking agent must be added to RICRETE 1C: RICRETE 1C / PLUS (see in addition to the “Product preparation” chapter).
