NORPHEN 200

SOLVENT-FREE EPOXY ENAMEL

Epoxy coating free of solvents and water for substrates with humidity up to 3% (carbide method), high yield. Available in the colours of the colour mixing system.
For low-coverage colours, use NORPHEN 200 FONDO first.
Can be decorated by dusting with coloured LAMINE or MICROLAMINE and then finishing with EASY LAST COAT TRASPARENTE.

Certificazioni

SKU: NORPHEN 200 Categories: COLOURED THIN-FILM PROTECTIVE TREATMENT, RESINS FOR INDUSTRIAL FLOORS

Description
Technical data

TECHNICAL FEATURES

FIELD OF USE

APPLICATIONS

TYPE OF APPLICATION	MINIMUM CONSUMPTION	MAXIMUM CONSUMPTION	UoM	DILUTION
As a thin-film coating on new or old concrete smoothed with a diamond grinding wheel (without deep scratches)	0,30	0,35	kg/m²	–
As a coating on new or old concrete after deep smoothing	0,28	0,30	kg/m²	–
As a non-slip coating on new or old concrete after deep shot-peening	0,55	0,55	kg/m²	–
As a smooth coating (slightly textured) on new or old concrete after deep shot-peening	0,70	0,70	kg/m²	–
As a top coat for MALTA RAPIDA or STRATOFLEX on surfaces prepared with 0.3–0.9 mm QUARTZ sprinkled until saturation	0,50	0,50	kg/m²	–
As a top coat for MALTA RAPIDA or STRATOFLEX on surfaces prepared with the self-levelling technique	0,15	0,15	kg/m²	–
As a coloured base coat for the application of AQUALAMINE in interiors	0,30	0,30	kg/m²	–

VARIANT	PACKAGING	ADR	UNITS PER PALLET	COMPONENTS
RAL 7040	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
RAL 7040	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket
TIER 1 COLOUR	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
TIER 1 COLOUR	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket
TIER 2 COLOUR	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
TIER 2 COLOUR	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket
COLOURABLE	kit (A+B) – 3,9 kg	P*	–	A = 2,90 kg – metal bucket
COLOURABLE	(A+B) – 11,7 kg	YES	–	A = 8,7 kg – metal bucket
TIER 1 COLOUR	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
TIER 1 COLOUR	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket
TIER 2 COLOUR	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
TIER 2 COLOUR	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket
TIER 3 COLOUR	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
TIER 3 COLOUR	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket
TIER 4 COLOUR	kit (A+B) – 4,33 kg	P*	–	A = 3,33 kg – metal bucket
TIER 4 COLOUR	(A+B) – 13 kg	YES	–	A = 10 kg – metal bucket

Technical data

Description

NORPHEN 200 is a bi-component epoxy product that can be used to formulate coatings for concrete floors.
The product is made up of:
• component A: a mixture of liquid epoxy pre-polymers and special fillers;
• component B: co-polymerisation amine.
Coatings made with NORPHEN 200 feature considerable hardness, resistance to abrasion and good general chemical resistance, while retaining good flexibility.
Besides this, NORPHEN 200 creates a coating with a pleasant surface appearance (smooth or non-slip depending on the application method) that is impermeable, glossy, easy to clean, suited above all to environments requiring special hygienic measures (refer to the “Certifications” paragraph) and ease of maintenance.

Field of use

NORPHEN 200 is used as:
• Dust-proof, coloured, waterproof and drive-over coating with 150 to 300 micron thickness, for industrial concrete floors.
• Anti-dust coating with high mechanical resistance loaded with quartz or corundum fillers with thickness between 500 and 1,000 micron, for enhanced resistance to abrasion and/or to create grip (slip resistance, see Table 1).
• Coloured base coat for flooring styled with AQUALAMINE, glitter etc., and finished with transparent NORDPUR ESTERNI.
• Top coat of multi-layer systems structured with MALTA RAPIDA and STRATOFLEX.

DATA SHEETS DOWNLOAD

Technical data sheet (PDF)

certificate - NORPHEN 200 - FUOCO_PAVIMENTO certificate - NORPHEN 200 - HACCP

Safety Data Sheet. A (PDF) Safety Data Sheet comp. B (PDF)

DoP (PDF)