Mono-component binder for indoor and outdoor applications, frost-resistant, suitable for laying ceramic tiles up to 900 cm².
Suitable for adhesive thicknesses up to 5 mm.
| TYPE OF APPLICATION | MINIMUM CONSUMPTION | MAXIMUM CONSUMPTION | UoM | DILUTION |
|---|---|---|---|---|
| All surfaces and materials to be bonded | 2 | 5 | kg/m2 | – |
| VARIANT | PACKAGING | ADR | UNITS PER PALLET | COMPONENTS |
|---|---|---|---|---|
| BIANCO | bag – 25 kg | NO | 48 – bag | |
| GRIGIO | bag – 25 kg | NO | 48 – bag |
MONOTACK FLEX BASE is a mono-component adhesive for tiles made with cement, selected-grain quartz sand, resins and special additives.
MONOTACK FLEX BASE è adatto all’incollaggio in sovrapposizione di ceramica, grès, clinker, marmette ecc… ed è progettato per spessori di adesivo fino a 5 mm.
MONOTACK FLEX BASE can be prepared by mixing with the sole addition of clean water when applied. In addition to being highly workable, the product features high adhesiveness and thixotropy, and excellent open time.
Once cured, MONOTACK FLEX BASE boasts excellent frost resistance.
► MONOTACK FLEX BASE can be used on the following laying supports:
• For indoor walls and ceilings, on conventional two-coat plaster or painted plaster substrates (check its adhesion to the paint before use).
• Plasterboard (rigidly supported).
• Ready-made or conventional screeds and self-levelling screeds.
• Gypsum, wood and anhydrite screeds, prior treatment with RICRETE 1C.
• Exterior walls coated with cement plaster or mortar.
• Indoor or outdoor floors, and sufficiently seasoned sand and cement screeds (e.g. 1 month for 6 cm-thick screeds).
• Radiant floors.
• Tiled floors.
► MONOTACK FLEX BASE is suitable for laying:
• Single-fired and double-fired ceramic tiles (of every type and size, up to 15 mm thick) both indoors and outdoors.
• Stoneware, porcelain stoneware and clinker tiles.
• Cotto.
• Insulating panels (such as expanded polystyrene, expanded polyurethane, rock wool, glass wool) and sound-absorbing panels type Eraclit®, etc. (point adhesion).
► MONOTACK FLEX BASE is not suitable for bonding on:
• High-shrinkage concrete such as, for example, thin industrial floors.
• Substrates subject to excessive movement.
• Linoleum and PVC without having first verified the adhesion on the support. In case of a positive outcome, wash the coating with STRIPPER and prime it with RICRETE 1C.
• Rubber floors.
• Galvanised or aluminium sheets.
