SOLVENT-BASED URETHANE IMPREGNATING AGENT

X-POWDER

COD: X-POWDER

Consolidating, dustproofing and non-yellowing adhesion primer. Recommended as a protective treatment for industrial floors subject to high stresses, even outdoors.

categories:

X-POWDER finds employment as:
- consolidating and dust-proofing of concrete surfaces finished with neutral or coloured, poorly absorbent hardening powders;
- bonding coat for coatings of epoxy or polyurethane nature (both solvent and water-based), on low absorbent surfaces (clinker tiles, porcelain tiles, vitreous mosaic, etc.) after treating the surface with TILEPUR BASE adhesion promoter (see Technical Data Sheet);
- Due to the total absence of yellowing even in an outdoor environment, X-POWDER is ideal as a consolidating and anti-dusting agent and as an adhesion promoter for resin-based coatings, even transparent ones.
- X-POWDER can be used both indoors and outdoors.

Application type	Minimum consumption	Maximum consumption	U.M.	Notes
On concrete (depending on the porosity of the substrate)	0,12	0,13	L/m²	porphyry.
On natural stone	0,12 *	3,00 **	L/m²	n white Ostuni stone (penetration of more than 2 cm in 2-3 coats).
On tiles (after treatment with TILEPUR BASE, 40 g/m²)	0,08	0,09	L/m²