OSMOTIC-EFFECT THREE-COMPONENT EPOXY SKIM COAT

W3 SUPER-BARRIER

COD: W3 SUPER-BARRIER

Smoothing agent for new or old concrete surfaces, with high mechanical strength and high drying speed, osmotic effect, ideal for smoothing surfaces with negative water pressure.

categories:

W3 SUPER-BARRIER finds employment as:
- Base coat for vertical and horizontal surfaces also intended for subsequent resin coating, applied with trowel or 25 cm SHORT-PAPE ROLLER MOD. 1418 (in Nylon);
- high-hardness surface reconstruction layer for concrete floors, especially outdoors;
- smoothing layer to repair small holes or imperfections in the finish, etc. on concrete floors, even in the presence of moisture in the substrate;
- Smoothing of the substrate, reinforced with GLASS NET (see Technical Data Sheet), before laying resin floors, where there is a risk of rising damp from the substrate;
- Wall and floor levelling compound, with or without GLASS NET, on swimming pool structures, before gluing tiles, in the presence of moisture from the substrate;
- negative pressure waterproofing in combination with SW SOLID (see Technical Data Sheet).
The materials to which the application of W3 SUPER-BARRIER is suitable are:
- in-situ concrete;
- precast concrete;
- tiled surfaces, after diamond grinding.