Adhesion primer on smooth, non-absorbent surfaces

RICRETE 1C

COD: RICRETE 1C

Single-component water-based viscous liquid product with granular effect. Very high adhesion (up to 15 N/mm² on porcelain stoneware) for "difficult" adhesions such as in the case of skim coats, adhesives and mortars on glass, ceramics, stoneware, painted surfaces, plastics, etc.

categories:

RICRETE 1C is used as an adhesion promoter for skim coatings, paints, mortars, resin coatings and adhesives of all kinds on glossy, non-absorbent substrates such as:
- glazed ceramic wall tiles;
- stone cladding;
- Rigid PVC and other plastics (except PE and PTFE);
- linoleum;
- resin coatings (water- or solvent-based).
RICRETE 1C can also be used as an adhesion promoter on concrete and on non-absorbent, moisture-sensitive substrates such as:
- wood (including chipboard, MDF and OSB);
- chalk;
- anhydrite.
► Typical applications of RICRETE 1C are:
→ the preparation of tiled surfaces (with glazed ceramics, porcelain stoneware, stone) or resin-coated surfaces for overlaying (trowel or self-levelling);
→ the preparation of tiled surfaces (with glazed ceramic, porcelain stoneware, stone) or resins for gluing tiles with cement adhesives;
→ the surface treatment of chipboard or wood panels for subsequent application of moisture protection products;
→ the surface treatment of plasters, both interior and exterior, even in the presence of thin-film paints or coatings.
► The product can also be used on heated screeds.
For use on surfaces that will be in continuous contact with moisture, a special cross-linking agent must be added to RICRETE 1C: RICRETE 1C/PLUS (see further chapter 'Product Preparation').

Application type	Minimum consumption	Maximum consumption	U.M.	Notes
RICRETE 1C pure	0,12	0,15	kg/m²	Do not dilute with water or solvents.
RECRETE 1C + 10% RECRETE 1C/PLUS	0,13	0,16	kg/m²	Do not dilute with water or solvents. The product with [xxxx]/PLUS added is slightly more viscous and textured: this justifies the slightly higher consumption.