HYDROCARBON-RESISTANT EPOXY ENAMEL

NORPHEN 200 FUEL

COD: NORPHEN 200 FUEL

Two-component waterproofing epoxy coating, for floors, walls and tanks, fuel resistant.

categories:

NORPHEN 200 FUEL is used as a coating - at thicknesses between 200 and 500 microns - of:
- floors and walls of boiler rooms;
- tanks and containment basins for diesel oils, fuel oils (BTZ, MTZ etc.), lubricating oils, vegetable oils for non-food uses;
- tanks for temporary containment of aromatic hydrocarbons;
- machine shop floors;
- areas where urea solutions (e.g. AD Blue) are handled for automotive use;
- floors subjected to the action of cutting oils.
NOTE: for internal coatings of petrol tanks, ask for EPOXY LINER (see Technical Data Sheet).

Application type	Minimum consumption	Maximum consumption	U.M.	Notes
The consumption of NORPHEN 200 FUEL is listed by type of substrate; the preparation of the latter is given in the technical data sheet.
Applied by roller or brush in 2 coats on dry substrates after washing, sanding or diamond grinding	0,30	0,35	kg/m²
Applied by roller or brush in 2 coats on steel surfaces (ground or sandblasted and primed)	0,3	0,35	kg/m²
Applied with a roller or brush in 1 coat as a protective top coat of self-levelling MALTA RAPIDA or STRATOFLEX coatings	0,15	0,18	kg/m²
Applied by trowel mod. L400 as a top coat of MALTA RAPIDA or STRATOFLEX coatings dusted with QUARTZ sand 0.30.9 mm	0,70	0,70	kg/m²
Applied by trowel mod. L400 as a top coat of MALTA RAPIDA or STRATOFLEX coatings dusted with QUARTZ sand 0.71.2 mm	0,90	0,90	kg/m²