COMPONENTE C EXTRA W

WATER-BASED BI-COMPONENT RESIN

Anti-dirt additive for water-based bi-component polyurethane finishes (top coat).

SKU: COMPONENTE C EXTRA W Categories: COLOURED THIN-FILM PROTECTIVE TREATMENT, RESINS FOR INDUSTRIAL FLOORS

Description
Technical data

TYPE OF APPLICATION	MINIMUM CONSUMPTION	MAXIMUM CONSUMPTION	UoM	DILUTION
As an additive for NORDPUR SW, NORDPUR SW MAT XF, COAT MAT or COAT LUX (only on the top coat)	59	61	g/kg (A+B)

VARIANT	PACKAGING	ADR	UNITS PER PALLET	COMPONENTS
for NORDPUR SW / MAT XF 4,5 KG	0,14 kg	NO	–	plastic bottle
for NORDPUR SW MAT XF 9 KG	0,27 kg	NO	–	plastic bottle
for NORDPUR SW 6,2 KG	0,19 kg	NO	–	plastic bottle
for NORDPUR SW 18,6 KG	0,56 kg	NO	–	plastic bottle
for COAT LUX 4,5 KG	0,14 kg	NO	–	plastic bottle
for COAT MAT 5,5 KG	0,16 kg	NO	–	plastic bottle

Technical data

Description

COMPONENTE C EXTRA W is an additive specially formulated for bi-component water-based polyurethane top coats (NORDPUR SW, NORDPUR SW MAT XF, COAT LUX e COAT MAT) which – when added to a top coat – is able to:
• Considerably reducing the adherence of dirt to surfaces.
• Facilitate cleaning of the surface.
• Enhancing resistance to scratching.
• Increase the hydrophobicity and oleophobicity of the surface.
• Strongly reducing the adhesion of enamels, paints, etc. on surfaces.
• Reducing damages due to the “hot tyre” effect on surfaces subjected to vehicle traffic (car parks, car showrooms, etc.).
Thanks to its special chemical nature, COMPONENTE C EXTRA W binds with the polymer matrix and is not released over time.
This will ensure that the advantages it bestows when used on the surfaces remain stable.
COMPONENTE C EXTRA W does not cause not suffers colour alteration or changes in opacity even after exposure to sunlight.

Field of use

COMPONENTE C EXTRA W is suitable as an additive (top coat) in combination with the following products:
• NORDPUR SW.
• NORDPUR SW MAT XF.
• COAT LUX.
• COAT MAT.
In which it is added ONLY in the final coat.
The anti-adhesion power of COMPONENTE C EXTRA W is so strong that when intermediate coats are applied, the adhesion of the successive layers is annulled.

DATA SHEETS DOWNLOAD

Technical data sheet (PDF)

Safety Data Sheet (PDF)