ADHESIVE FOR INTERIORS AND EXTERIORS
MONOTACK FLEX S1
COD: MONOTACK FLEX S1
ex. MONOTACK FLEX
Deformable one-component adhesive for outdoor and indoor use, on low-absorption tiles and natural stones. For laying mosaic or tile on swimming pools, bathrooms, shower cabins, wellness areas. Recommended for small, medium and large formats. Adhesive thickness up to 5 mm.
Description
MONOTACK FLEX S1 is a mono-component adhesive for tiles made with cement, selected-grain quartz sand, resins and special additives. MONOTACK FLEX S1 is suitable for overlapping bonding of stoneware, clinker, tiles etc... and is designed for indoor and outdoor application, for adhesive thicknesses up to 5 mm. MONOTACK FLEX S1 is prepared by mixing with only the addition of clean water at the time of laying. The product has easy workability, high adhesiveness and thixotropy, has excellent open time characteristics and is suitable for both wall and floor installation. After ripening, MONOTACK FLEX S1 demonstrates excellent frost resistance.
Field of application
- ► MONOTACK FLEX S1 can be used on the following substrates:
- • On walls and ceilings indoors, on traditional substrates covered with civil plaster, painted plaster after checking the adhesion of the paint layer.
- • Rigidly supported plasterboard.
- • Premixed or traditional cementitious screeds and self-levelling cementitious screeds.
- • Gypsum, anhydrite and wood screeds, after treatment with RICRETE 1C.
- • External walls in cement plaster or mortar.
- • Indoor or outdoor floors and screeds made of sand and cement that have been sufficiently seasoned (e.g. 45 days for 6 cm thick screeds).
- • Radiant floors with cement screed.
- • Radiant floors with anhydrite screed or gypsum fibre sheets after treatment with RICRETE 1C.
- • Floors that are already tiled (overlapping gluing).
- • Single and double-fired ceramic tiles (of all types and sizes, up to 15 mm thick) both outdoors and indoors.
- • Stoneware, porcelain stoneware and clinker tiles.
- •Cooked.
- • Ceramic and glass mosaics on mesh.
- • Insulating panels made of EPS or XPS expanded polystyrene, polyurethane foam, rock wool, glass wool (spot bonding).
- • Sound-absorbing panels such as Eraclit®, etc. (stitch bonding).
- ► MONOTACK FLEX S1 is not suitable for gluing on:
TECHNICAL FEATURES
-
![]()
Resistente al gelo
-
![]()
Pedonabile
-
![]()
Carrabile
field of use
-
![]()
Per interni / esterni
-
![]()
Piscine
applications
-
![]()
Monocomponente
-
![]()
Applicazione frattazzo
CE Marking
| Application type | Minimum consumption | Maximum consumption | U.M. | Notes |
| All surfaces and materials to be bonded | 2 | 5 | kg/m² | Do not exceed, in any case, 7 - 8 kg/m². |
| Variant | Packaging | ADR | Pallet packaging | Components |
| WHITE | bag - 25 kg | NO | 48 bags | |
| GREY | bag - 25 kg | NO | 48 bags |
